Duravent Ventinox Rigid Factory-Built Lining System Bedienungsanleitung PDF herunterladen (Seite 7)

Fig. 8 - Lining sustem for new replace installation

Fig. 9 - Existing replace relining installation

Fig. 10

7. Twist lock the rain cap to the top of the liner.

8. From inside the house, twist lock the masonry

adaptor to the tee. Now fasten the adaptor’s collar to

the masonry wall.

Be sure there is at least 18 inch clearance between

the single wall pipe and any combustible material.

INTERIOR SUPPORT

A liner installed in a replace chimney will require an

interior support at the top of the replace.

• NEW CHIMNEY LINING (g.8)

• Install the support plate on top of the replace

• Proceed with the erection of the liner along the

chimney construction as described before.

• EXISTING FIREPLACE (g.9)

• Install the liner as described previously

• (see "existing chimney lining"). With the liner

hanging in the replace, place the interior support in

position and mark its location on the liner.

• Remove the support and attach the support collar

around the liner slightly above your mark.

• Attach the support to the replace wall using four

bolts and lags.

• Continue connection to your stove.

VENTINOX LINING SYSTEM - 7

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Duravent Ventinox Rigid Factory-Built Lining System Bedienungsanleitung Seite 7